Reefer Service Equipment Reefer Service Flow Pre-requirement for Cargo Protection

When receiving reefer container, Shipper should check outer/inner status of container and operation condiiton of UNIT.  Pre-cooling of Cargo In order to transport cargo in safe condtion, Shipper should stuff pre-cooled cargo into container as the same temperature as Shipper requested.  Pre-cooling of Reefer Container Do not pre-cool container itself. Under situation that temperature of outer air is higher than inner air, if we open pre-cooled container for cargo stuffing, hot air of outside will come into inside of pre-cooled container. As the result, a frost will be made in Evaporator Coil of UNIT and the function of machine is fallen off.   For safe cargo transportation, shipper should comply with the below instruction in cargo stuffing process. 1) Cargo stuffing should be proceeded within temperature degree that shippers require. 2) To secure circulation of cooling air, an interval between cargo and door should be maintained as 30 cm. 3) Caro must not be loaded higher than Cargo loading limit line(Red Line). Red-Line is marked 10~15 cm below from the top. 4) Cargo should be stuffed within loadable weight of container. 5) Cargo stuffing should be proceeded as promptly as possible to minimize cargo temperature increase. 6) After cargo stuffing is done, all 4 container locking bar should be fixed into Cam Retainer and Seal should be fasten too. 7) Mix-Stuffing of different kinds of cargo is prohibited in one container. · Keen Attention in case of Cargo Stuffing · Recommended Commodity Condition